Assembly instructions for 3-sided fitting room - item no. 2009

Item no.: 2009

Before you begin
Lay out all parts so you have a clear overview of what is included.

4 Posts
6 Connecting tubes
1  Curtain rod
1 Curtain
12 Curtain rings
3 Melamine panels
4 Adjustable feet (a)
4 End caps (b)
14 Allen bolts for posts (c)
12 Screws for melamine panels (d)
3 Threaded inserts
( Used only if multiple fitting rooms are mounted in a row )
1 Allen key (e)

Not included:
Wall-mounting screws – as these depend on wall type and chosen mounting method.

Assembly of fitting room wall – freestanding 3-sided fitting room (without fixation to the wall)

1.   Fit the adjustable feet to the base of the 4 square tubes/posts.
      This establishes the orientation of the posts - up and down.
2.   Fit the two connecting tubes to post no. 1.
      The small holes should face the panel.
3.   Fit post no. 2 to the two connecting tubes.
      The first wall section is complete.

🔸Repeat:
4.   Fit the two connecting tubes to post no. 2.
5.   Fit post no. 3 to the two connecting tubes.
      The second wall section is complete.

🔸Repeat:
6.   Fit the two connecting tubes to post no. 3.
7.   Fit post no. 4 to the two connecting tubes.
      The third wall section is complete.

8.   Fit the curtain rod into posts no. 1 and 4.
      Remember to place the curtain rings on the rod before final installation.

9.   Fit the melamine panels into the frames.
      Screw them with 2x2 screws via the connecting tubes—top and bottom.

10. Hang the curtain on the curtain rings.
      Use the gathered tape if you want more folds.
      Optionally steam the curtain with a steamer.

11. Fit the end caps to the tops of the 4 square tubes/posts.

Hang the curtain on the curtain rings.
     – Use the gathered tape to create neat folds in the curtain.
     – For a smooth finish, you can steam the curtain with a steamer.

Fit the curtain rod into the outermost post – pointing toward the wall that forms the other side of the fitting room.