7,000 products - Store inventory and sales promoters

Assembly instructions for 2-sided fitting room - item no. 2008

How to assemble your 2-sided fitting room
Step by step – two wall frames mounted against the fixed wall.

Item no.: 2008

Before you start
Lay out all parts so you have a clear overview of what is included.
3 uprights
4 intermediate tubes
1 curtain rod
1 wall flange
1 curtain
12 curtain rings
2 melamine panels
3 adjustable feet (a)
3 end caps (b)
10 Allen bolts for uprights (c)
8 screws for melamine panels (d)
1 Allen key (e)

Parts for fitting room

Not included:
Wall-mounting screws – these depend on the wall type and the chosen mounting method.

Assembling the fitting room wall including attachment to the wall

  • Fit the end caps (b) to the top of the three square tube uprights.
  • Fit the adjustable feet (a) to the bottom of the uprights.
    – The uprights now have a direction: top and bottom.
  • Attach the two intermediate tubes to upright no. 1.
    – The small holes should face the panel.
  • Mount the frame on the wall at a suitable distance from the fixed wall.
    – This frame forms one side of the fitting room.
  • Attach upright no. 2 to the two intermediate tubes.
    – The first wall frame is now complete.
  • Repeat the process: Attach two new intermediate tubes to upright no. 2.
  • Attach upright no. 3 to these intermediate tubes.
    – The second wall frame is now complete.
  • Install the curtain rod in upright no. 3 so the rod points toward the fixed wall.
  • Mount the wall flange on the fixed wall at an appropriate height so the curtain rod is level.
    – Secure the curtain rod in the wall flange.
    – Remember to put the curtain rings on before final assembly.
  • Fit the melamine panels into the frames.
    – Fasten the panels with 2 x 2 screws via the intermediate tubes (top and bottom).
  • Hang the curtain on the curtain rings.
    – Use the gathering tape if needed to give the curtain neat pleats.
    – For a smooth finish, the curtain can be steamed with a steamer.

Install the curtain rod in the outermost upright – pointing toward the wall that forms the other side of the fitting room.

Assembly drawing for 2-sided fitting room (2008)